Remak® Acoustic Woodwool Design

Catalogue Remak® Woodwool

Catalogue Remak® Woodwool Design

Remak® Woodwool design solutions allow you to combine good acoustics and a healthy indoor climate with expression and character. You can create your own patterns and rhythms in the design – and vary and scale the various design solutions to create a very cohesive sense of harmony on ceilings or walls. In a nutshell, it’s not about the panel, but the surface, the emotion.

The series of design solutions marks a new chapter in Remak® Acoustic history. We began in 2010 with acoustic panels, and have been developing acoustic solutions for modern architecture in recent years. We have added exciting designs along the way. We are now taking our design solutions to the next level – launching a whole series suitable for mass-production using modern technology, at competitive prices.

Remak® Woodwool line

Remak® Woodwool line provides an elegant, uniform ceiling surface with no visible joints, and the peaceful look characteristic of timber batten ceilings. Remak® woodwool line acoustic panels have length wise surface grooves. Each panel has ten evenly spaced grooves.

Remak® Woodwool line design

Remak® Woodwool line design has milled grooves in the surface and overlapping edges on all sides. When you join the panels, the result is continuous grooves with a seamless look and invisible joints. You perceive the surface pattern as a whole, and it is difficult to detect where the panels meet.

The solution is available in four variants, which can be freely combined. You can choose to have equal or varying intervals between the grooves, determining the rhythm of the resulting look. 

Remak Woodwool tilt line

This solution results in a multifaceted surface. Each acoustic panel has six angled grooves, and milled half grooves along the outer edges.This results in continuous straight grooves at the joints between panels, and an elegant combination of angled and straight grooves. 

Remak Woodwool puzzle

This solution gives you the freedom to create a surface with repetitive or random patterns. Remak® Woodwool puzzle is made up of square acoustic panels with four equal sections. Three of the four sections have diagonal, vertical or horizontal grooves cut.

You can continue the pattern from panel to panel, and vary the effect by offsetting the rows or turning some panels 90º, 180º or 270º. It is entirely up to you which ‘puzzle’is presented on the surface.

Remak Woodwool dots

If you want a cohesive surface with a dynamic pattern of circular elements, choose Remak® Woodwool dots. The surface of each acoustic panel features 66 round indentations, varying in size from 20 to 60 millimetres in diameter. The size of the indentations increases and decreases in a pattern across each panel – and this pattern is reflected in the entire surface when the panels are installed in stretcher bond.

Remak  Woodwool curves

Join the elegant design wave by choosing Remak® Woodwool curves. This design protected solution consists of acoustic panels with curved grooves. Each panel has four narrow curved grooves along side a wider groove cut in the centre of the panel. 

Remak® Woodwool curves offers a seamless surface, with a lengthwise pattern of repetitive, soft curves. All the grooves match up on the short sides, so you can turn panels 180 degrees during installation without problem.

Remak Woodwool tiles

Remak® Woodwool tiles results in a design with a pattern of rectangles which can vary in size. The solution consists of quadratic acoustic panels with milled parallel grooves in the surface.The panels are available in five variants, which can be freely combined.

Panels can also be rotated 90 degrees, resulting in a broken and more varied look in the surface.Ahalf groove has been cut on all sides of each panel, so that an extra groove of the same size is formed where two panels join.

Remak  Woodwool rhomb

Create a surface with a scalable three-dimensional pattern by combining rhombus-shaped acoustic panels. The sides of each panel are parallel in pairs, and all sides have a half groove cut, resulting in a groove at the joints. If three panels are combined, they form a hexagon.

If you choose the Remak® Woodwool rhomb hatch variant, each panel has four milled grooves that match the width of groove  formed at the joints.You can combine the rhombuses in repetitive or random patterns, producing the exact design you want.

Remak  Woodwool rhomb mini

Like Remak® Woodwool rhomb, this mini version can be used to create a three-dimensional pattern. The solution consists of hexagon-shaped acoustic panels that are half the size of the hexagon formed by joining three classic Remak® Woodwool rhomb panels. The three rhombuses on the hexagon panel are bounded by grooves.

If you choose the Remak® Woodwool rhomb hatch mini variant, each rhombus will also contain four parallel grooves (12 grooves per acoustic panel). The panels have grooves cut on the edges, and by rotating the panels you can vary the pattern so that the three-dimensional effect is even more pronounced.

For more information, please contact Remak

Hotline: 0902.441.981

Office: Lot10, Lai Yen Industrial Zone, An Khanh, Hoai Duc, Ha Noi

Email: [email protected]